VEICHI Solar Drive Remote Access Module: Introduction and Commissioning Guide
VEICHI Solar Drive Remote Access Module: Introduction and Commissioning Guide
Remote access technologies have become an essential part of modern solar-powered irrigation systems, enabling faster, safer, and more efficient system management. Monitoring, controlling, and configuring solar drives remotely significantly reduces field visits while improving operational efficiency.
In this episode of the System Solar Power Energy Systems technical content series, we introduce the VEICHI Remote Access Module and explain its installation, commissioning process, and remote management capabilities.
⸻
What Is the VEICHI Remote Access Module?
The VEICHI Remote Access Module is a GSM-based communication solution that supports the RS485 communication protocol.
Through this module, users can:
* Start the solar drive remotely.
* Stop the system remotely.
* Modify drive parameters.
* Monitor frequency, current, voltage, and power values in real time.
* Check the operating status of the system through the mobile application.
These capabilities enable complete remote management without the need for on-site intervention.
⸻
Module Package Contents
Each VEICHI Remote Access Module kit includes:
* One communication module
* Two antenna cables
* One four-pin communication cable
All components are designed for fast installation and reliable communication.
⸻
Module Installation
Installation begins by connecting the four-pin communication cable to the designated communication terminals of the drive.
Next:
* Connect the GSM antenna.
* Connect the GPS antenna.
* Insert the SIM card into the module.
When installation is completed successfully, the flashing red LED on the module indicates that the device is online and connected to the communication network.
⸻
Remote Monitoring via the Mobile Application
Once the VEICHI mobile application is installed, users can securely access the connected drive.
The main dashboard provides real-time monitoring of:
* Operating frequency
* Output current
* Output voltage
* Output power
* Drive operating status
This allows users to monitor system performance remotely at any time.
⸻
Remote Start and Stop Operations
The mobile application allows operators to start and stop the drive remotely.
Before executing a command, the application requests security confirmation.
After entering the verification code, the command is transmitted securely to the drive.
Users can immediately observe the operating frequency and running status directly from the application interface.
⸻
Remote Parameter Configuration
The VEICHI Remote Access Module is not limited to monitoring functions.
Users can also remotely configure:
* Basic parameters
* Monitoring parameters
* Motor protection parameters
Remote parameter management reduces maintenance time and minimizes unnecessary service visits.
⸻
User Account Activation
After the hardware installation is completed, the following information must be provided to the System Solar Power technical team:
* Customer username
* Seven-digit module identification code
Following registration, a user account is created, allowing secure access to the mobile application and all remote management features.
⸻
Conclusion
The VEICHI Remote Access Module enables centralized monitoring, remote control, and parameter management through a single mobile platform.
With real-time monitoring, secure remote start-stop operations, and remote parameter configuration, users can significantly improve operational efficiency while reducing on-site maintenance requirements.
At System Solar Power, we continue to provide not only high-quality products but also accurate technical expertise and sustainable energy solutions.
Follow our technical blog for more professional guides, commissioning procedures, application examples, and advanced technical information about VEICHI Solar Drive technologies.